From: Geert Uytterhoeven <geert@linux-m68k.org>
M68k: Remove nowhere referenced files
Signed-off-by: Domen Puncer <domen@coderock.org>
Signed-off-by: Geert Uytterhoeven <geert@linux-m68k.org>
Signed-off-by: Andrew Morton <akpm@osdl.org>
---
/dev/null | 102 --------------------------------------------------------------
1 files changed, 102 deletions(-)
diff -L arch/m68k/apollo/dn_debug.c -puN arch/m68k/apollo/dn_debug.c~m68k-remove-nowhere-referenced-files /dev/null
--- 25/arch/m68k/apollo/dn_debug.c
+++ /dev/null 2003-09-15 06:40:47.000000000 -0700
@@ -1,22 +0,0 @@
-
-#define DN_DEBUG_BUFFER_BASE 0x82800000
-#define DN_DEBUG_BUFFER_SIZE 8*1024*1024
-
-static char *current_dbg_ptr=DN_DEBUG_BUFFER_BASE;
-
-int dn_deb_printf(const char *fmt, ...) {
-
- va_list args;
- int i;
-
- if(current_dbg_ptr<(DN_DEBUG_BUFFER_BASE + DN_DEBUG_BUFFER_SIZE)) {
- va_start(args,fmt);
- i=vsprintf(current_dbg_ptr,fmt,args);
- va_end(args);
- current_dbg_ptr+=i;
-
- return i;
- }
- else
- return 0;
-}
diff -L arch/m68k/sun3x/sun3x_ksyms.c -puN arch/m68k/sun3x/sun3x_ksyms.c~m68k-remove-nowhere-referenced-files /dev/null
--- 25/arch/m68k/sun3x/sun3x_ksyms.c
+++ /dev/null 2003-09-15 06:40:47.000000000 -0700
@@ -1,13 +0,0 @@
-#include <linux/module.h>
-#include <linux/types.h>
-#include <asm/dvma.h>
-#include <asm/idprom.h>
-
-/*
- * Add things here when you find the need for it.
- */
-EXPORT_SYMBOL(dvma_map_align);
-EXPORT_SYMBOL(dvma_unmap);
-EXPORT_SYMBOL(dvma_malloc_align);
-EXPORT_SYMBOL(dvma_free);
-EXPORT_SYMBOL(idprom);
diff -L include/asm-m68k/atari_SCCserial.h -puN include/asm-m68k/atari_SCCserial.h~m68k-remove-nowhere-referenced-files /dev/null
--- 25/include/asm-m68k/atari_SCCserial.h
+++ /dev/null 2003-09-15 06:40:47.000000000 -0700
@@ -1,67 +0,0 @@
-#ifndef _ATARI_SCCSERIAL_H
-#define _ATARI_SCCSERIAL_H
-
-/* Special configuration ioctls for the Atari SCC5380 Serial
- * Communications Controller
- */
-
-/* ioctl command codes */
-
-#define TIOCGATSCC 0x54c0 /* get SCC configuration */
-#define TIOCSATSCC 0x54c1 /* set SCC configuration */
-#define TIOCDATSCC 0x54c2 /* reset configuration to defaults */
-
-/* Clock sources */
-
-#define CLK_RTxC 0
-#define CLK_TRxC 1
-#define CLK_PCLK 2
-
-/* baud_bases for the common clocks in the Atari. These are the real
- * frequencies divided by 16.
- */
-
-#define SCC_BAUD_BASE_TIMC 19200 /* 0.3072 MHz from TT-MFP, Timer C */
-#define SCC_BAUD_BASE_BCLK 153600 /* 2.4576 MHz */
-#define SCC_BAUD_BASE_PCLK4 229500 /* 3.6720 MHz */
-#define SCC_BAUD_BASE_PCLK 503374 /* 8.0539763 MHz */
-#define SCC_BAUD_BASE_NONE 0 /* for not connected or unused
- * clock sources */
-
-#define SCC_BAUD_BASE_M147_PCLK 312500 /* 5 MHz */
-#define SCC_BAUD_BASE_M147 312500 /* 5 MHz */
-#define SCC_BAUD_BASE_MVME_PCLK 781250 /* 12.5 MHz */
-#define SCC_BAUD_BASE_MVME 625000 /* 10.000 MHz */
-#define SCC_BAUD_BASE_BVME_PCLK 781250 /* 12.5 MHz */ /* XXX ??? */
-#define SCC_BAUD_BASE_BVME 460800 /* 7.3728 MHz */
-
-/* The SCC configuration structure */
-
-struct atari_SCCserial {
- unsigned RTxC_base; /* base_baud of RTxC */
- unsigned TRxC_base; /* base_baud of TRxC */
- unsigned PCLK_base; /* base_baud of PCLK, for both channels! */
- struct {
- unsigned clksrc; /* CLK_RTxC, CLK_TRxC or CLK_PCLK */
- unsigned divisor; /* divisor for base baud, valid values:
- * see below */
- } baud_table[17]; /* For 50, 75, 110, 135, 150, 200, 300,
- * 600, 1200, 1800, 2400, 4800, 9600,
- * 19200, 38400, 57600 and 115200 bps. The
- * last two could be replaced by other
- * rates > 38400 if they're not possible.
- */
-};
-
-/* The following divisors are valid:
- *
- * - CLK_RTxC: 1 or even (1, 2 and 4 are the direct modes, > 4 use
- * the BRG)
- *
- * - CLK_TRxC: 1, 2 or 4 (no BRG, only direct modes possible)
- *
- * - CLK_PCLK: >= 4 and even (no direct modes, only BRG)
- *
- */
-
-#endif /* _ATARI_SCCSERIAL_H */
_